USB Controller for Amiga Zorro-II/III Bus
+++ Product is discontinued, please have a
look at its successor:
Algor
Deneb USB Controller. +++
Technical data:
- compatible with USB 1.1 and USB 2.0 specification (no highspeed mode)
- integrated 4-port hub
- all ports are protected against overvoltage and short circuit
- integrated power management on port by port base
- power saving 3.3V technology
- compatible with all 68030/040/060 and PPC turbo cards
- compatible with Zorro II / III busses
- bus interface logic can be updated without hardware modifications
- highspeed clockport for fast data transfers
- expansion port, e.g. for the
Norway Ethernet module
- expansion port can be used simultanously with USB operations
 Hardware Compatibility List
Software:
- integration into AmigaOS via system conform drivers
- comfortable control of commodity driver by hotkeys
- driver for USB mouse, keyboard, serial and parallel interface
- further drivers (webcam, digicam) also by third companies under development
Package contents:
- 1 Highway USB controller card
- 2 holding plates with two USB connectors each
- 1 detailed German installation manual
- 1 disk with driver software
Requirements
- Amiga OS 3.1 or higher
- Processor 68030 (25 MHz) or higher
- 100% compatible Zorro-II/III bus
- power supply with 2.0 Ampere minimum on 5V (each used USB port
will use a maximum of 500mA, depending on connected device)
|
