There are currently shipping restrictions imposed due to the
SARS-CoV-2 pandemic which may lead to delays of deliveries
outside of Europe. (For example, shipping to Australia currently
takes several weeks.)
68EC020-based Accelerator Card for Amiga 600
Furia EC020 is an accelerator card for Amiga 600 computers.
It is equipped with a Motorola MC68EC020/33 MHz CPU (and a Motorola MC68882/40 MHz
FPU on the FFPU version), furthermore it features 9.5 MB of on-board fast memory.
The quick access to the memory makes this little card a real monster, as it makes the
Amiga 600 more than ten times faster compared to a stock model.
The card also has the ability to map the Kickstart ROM into the Fast RAM. This was
tested with ROMs of 256 kB, 512 kB and also 1024 kB size. The card
also speeds up data transfer over the Amiga 600's internal IDE port.
The Furia EC020 card is easily controlled by the tool
To be able to access the computer's PCMCIA port, you need to remove 4 MB of
the Fast Memory by pressing Control+Amiga+Amiga for three seconds.
There are no fitting poles included with the delivery. The Furia socket is heavy
duty - in contrast to the socket used on other cards. If you fit furia on the CPU,
you will be able to lift the Amiga holding the Furia card in your fingers.
In order to obtain highest compatibility, original CPUs by Motorola and DRAM chips
were used. These chips are no longer produced nowadays, but the ones fitted on the
Furia card are NOS ("new old stock"), i.e. unused. The types used may
vary. Every card is tested with MBR2 test for two hours with heatsink covered.
- CPU 68EC020/33 MHz
- FPU 68882 (only available on the FFPU version)
- 9.5 MB Fast RAM
- MapROM function
- Highest quality PLCC bottom socket, stable and solid fit (AMPHENOL), high temp resistant
is a simple tool that handles all the functions of the Furia EC020 accelerator card.
You can download it directly clicking
There is no documentation included as it is very simple and straight forward.
To install, just copy the FuriaTune executable into the C: directory in your system.
To set the card up, just enter
in a Shell window and you will get list of its options including a simple description.
The FuriaTune tool should work on all Amiga operating systems including AmigaOS 1.0
and is tested up to AmigaOS 3.1.