Arctic Cooling Silentium T2
Full ATX Midi Tower Case
The Silencer T-Series is the first PC Tower case, which in terms of thermodynamics
does not follow the ATX standard of the mid 1990s. This case was developed from
scratch based on the idea of noise reduction and optimal thermodynamic properties.
Warm air emitted from the CPU cooler rise unhindered towards the top of the
case blown out of the case via two temperature controlled fans spinning at
max. 1900 RPM. This stops the CPU cooler from simply churning the same warm
air over and over again.
Cool air is drawn inside the case towards the CPU cooler and expansion cards.
This allows for the temperature of sensitive components to decrease significantly.
The power supply is cooled via two temperature controlled fans spinning at
max.1900 RPM. Thanks to the lower position of the power supply a smaller airflow
is sufficient for cooling.
The case has been designed from start with the goal to reduce the noise to an
absolute minimum. Openings to the front of the case were intentionally left out.
Air exhaustion and power supply cooling have been configured for a high end PC,
despite this high end configuration the system operates virtually silent.
I/O Front Connectors
Audio In and Out as well as two USB 2.0 connectors are included in the front bezel.
The IEEE 1394 (Firewire) connector is optional.
An aluminum frame muffles the harddrive noise and at the same time keeps it cool.
The suspended frame stops vibrations from carrying over on to the chassis.
The mechanicaly optimized construction using 0.8 mm SECC steel makes this case
despite a relative low weight one of the most torsion resistant cases available.
The screwless installation of expansion cards and disk drives allows for quick
and simple assembly.
- Mainboard: Micro & Full ATX
- Dimensions (WxHxD): 18 cm x 43.5 cm x 45 cm
- 2x ext. 5.25" drive bays
- 2x ext. 3.5" drive bays
- 2x int. 3.5" drive bay
- 1x suspended HDD frame
- 350W power supply
- 4x Arctic Fan 3, 1000-1900 rpm
- ARCTIC Ceramic Bearing, L10@40C=137´000h
- Frontpanel I/O: 2x USB 1.1/2.0
- Connectors for Audio, Mic, Speaker
- IEEE1394 optional
- Steel Quality: 0.8mm SECC