Suptronics X205 Raspberry Pi Expansion Board

Suptronics X205 Raspberry Pi Expansion Board

RS485, RS232, 3x USB Hub, USB Sound Card, WiFi, RTC, IR Receiver

Input Voltage:
6V to 20VDC converted to 5V, 3A via step-down DC/DC converter to power the Raspberry Pi

RS232 Serial Communications:
Control the Raspberry Pi over RS232 or connect to external serial accessories.

RS485 Serial Communications:
You will be able to have a communication port for your field bus directly connected to your RPi! It will allow up to 32 devices to communicate through the same data line over a cable length of up to 4,000ft with a maximum data rate of 10 Mbit/s.

3.5 mm MIC in jack
3.5 mm stereo audio jack
Audio IO connector (microphone input and stereo audio amplifier 3.3W x2)

WiFi (IEEE 802.11b/g/n) with external antenna
IR sensor (38KHz)

USB Storage:
Self-powered USB hub with 3 ports

Real-Time Clock (RTC):
Based on DS3231SN with included CR2032 battery

GPIO Control:
8-channel Darlington driver chip (ULN2803) allowing to control electronic circuits which require more current

Power output socket
Camera flex slot so camera can still be used with the expansion board attached
DIP switch to remove connection from RPi?s pin header
Directly connected on top of the Raspberry Pi using the board GPIO header pins
No wiring nor soldering is required
Duplicated the 40-pin header of the R-Pi in order to support existing expansion boards
Suitable for Raspberry Pi Model B+, Raspberry pi 2 Model B and Raspberry Pi 3 Model B

Package Contents:
1x X205 expansion board
1x USB adapter
1x 2.4 GHz WIFI antenna
4x nylon spacers (M3 x 20 mm)
8x nylon screws (M3 x 6 mm)
CR2032 battery

Further information is available at the manufacturer's website.